ST-10

  • 59-1010-IND

    59-1010-IND

    HS-06A05HA 6" 3-jaw high-speed, open-center hydraulic chuck with A2-5 adapter plate and M55x2.0 threaded draw nut; 169mm O.D.; 46mm bore; 15 ~ 169mm clamping range; 5.5mm jaw stroke on diameter; 12mm plunger stroke; 57KN maximum static gripping force; 1...

    $2,950.00
    Add to Cart
  • 59-1810-IND

    59-1810-IND

    5" high-speed, open-center hydraulic chuck with M35 x 1.5 threaded draw nut and AP05A05-HA (16T) adaptor for A2-5 spindle nose HS-05HA chuck for Haas ST-20 (Haas# 59-1810)

    $2,950.00
    Add to Cart
  • 90-0010A-IND

    90-0010A-IND

    Haas specific hydraulic cylinder with 46.0mm thru hole and M55 x 2.0 draw tube threading

    $3,230.00
    Add to Cart
  • 90-0058A-IND

    90-0058A-IND

    Closed-center, hydraulic cylinder with 15mm piston stroke; 16.6kn push - 13.9kn pull in piston force; 4.0kgf/cm2 max operating pressure; 6000 max. r.p.m; 0.8 total leakage

    $1,245.00
    Add to Cart
  • 90-0066-IND

    90-0066-IND

    Haas specific rear mounting short-body hydraulic cylinder with 46mm bore, 25mm piston stroke; 47kN push - 44kN pull in piston force; 4.5kgf/cm2 max operating pressure; 7000 max. r.p.m; 2.5 total leakage; M55 x 2.0 draw tube threading. Coolant collector...

    $2,530.00
    Add to Cart
  • HB04N1 Hard Jaw

    HB04N1

    Samchully hard steel jaws for hydraulic chuck with 1.5x60 serration Samchully Chuck compatibility: HS-05 Brand compatibility: Kitagawa™ B-205 Material: S45C Steel

    $435.00
    Add to Cart
  • MJ-MH-218 [3.0x60]

    MJ-MH-218 [3.0x60]

    Master jaws for MH-218 hydraulic chuck with 3.0x60° serration (SOLD AS A SET OF 3 MASTER JAWS)

    $4,870.00
    Add to Cart
  • SB05N1

    SB05N1

    Soft jaws for HS-05 hydraulic chuck with 1.5x60 serrations. Chuck compatibility: HS-05, HC-05, HC-05, and Kitagawa™ B-205 Material: S45C steel   Jaw Dimension

    $70.00
    Add to Cart