-
59-1433-IND
8" 3-jaw, high-speed, 210mm O.D.; 66mm bore; 23 ~ 210mm clamping range; 7.4mm jaw stroke on diameter; 17.5mm plunger stroke; 87KN maximum static gripping force; 1.5x60° master jaws serration; 5000 maximum rpm; M75 x 2.0 drawnut; for HAAS ST-15 (A2-6)
$3,390.00 -
59-1810-IND
5" high-speed, open-center hydraulic chuck with M35 x 1.5 threaded draw nut and AP05A05-HA (16T) adaptor for A2-5 spindle nose HS-05HA chuck for Haas ST-20 (Haas# 59-1810)
$2,950.00 -
90-0058A-IND
Closed-center, hydraulic cylinder with 15mm piston stroke; 16.6kn push - 13.9kn pull in piston force; 4.0kgf/cm2 max operating pressure; 6000 max. r.p.m; 0.8 total leakage
$1,245.00 -
90-0062A-IND
[90-0062A] SD-17568HA Haas specific hydraulic cylinder with 68.0mm thru hole and M75 x 2.0 draw tube threading [NPT 1")
$5,300.00 -
HB04N1
Samchully hard steel jaws for hydraulic chuck with 1.5x60 serration Samchully Chuck compatibility: HS-05 Brand compatibility: Kitagawa™ B-205 Material: S45C Steel
$435.00 -
HB08A1
Samchully hard steel jaws with 1.5x60 serration Samchully chuck compatibility: HC-08, HCH-08, MH-208V1, HS-08V1, or MH-208BV1 Brand compatibility: Kitagawa™ BS-308; Kitagawa™ B-08; Kitagawa™ BB-208; Kitagawa™ N-08;...
$535.00 -
MJ-HS-05 [1.5x60]
Master jaws for HS-05 hydraulic chuck with 1.5x60° serration.
$1,185.00 -
MJ-MH-208 [1.5x60]
Master jaws for MH-208 hydraulic chuck with 1.5x60° serration.
$1,430.00 -
SB05N1
Soft jaws for HS-05 hydraulic chuck with 1.5x60 serrations. Chuck compatibility: HS-05, HC-05, HC-05, and Kitagawa™ B-205 Material: S45C steel Jaw Dimension
$70.00 -
SB08B1
Samchully steel soft jaws with 1.5x60 serration Chuck compatibility: HS-08V1, HC-08, MH-208V1, MCA-08, and Kitagawa™ B-208 Material: S45C steel Jaw Dimension
$90.00 -
SK-SD-17
Seal Kit for SD-17568CU and SD-17568CU1 cylinders
$330.00 -
SK-Y-0715
Seal kit for the Samchully Y-0715R and Y-0715RE cylinder.
$140.00